gaqloop.blogg.se - Rockchip batch tool prepare idb fail rk3066

#Rockchip batch tool prepare idb fail rk3066 how to#
#Rockchip batch tool prepare idb fail rk3066 install#
#Rockchip batch tool prepare idb fail rk3066 driver#
#Rockchip batch tool prepare idb fail rk3066 upgrade#

Power down the MarsBoard and connect the MarsBoard to the computer then let the board go to recovery mode after the program should detect the device.Ĭlick the "Upgrade" button to begin flashing and when the flashing process finishes successfully you will see the following interface.

#Rockchip batch tool prepare idb fail rk3066 how to#

For information on how to make an update.img see update.img Select an image (RK3066 update.img), click Firmware. Then unzip it and double click AndroidTool.exe Using AndroidTool to flash update.img (Firmware)ĭownload AndroidTool from here.

use upgrading firmware (flash update.img only, it will erase everything.).

use Download Image (can flash by partitions).

There are two methods to flash an image use android tools.

#Rockchip batch tool prepare idb fail rk3066 driver#

Now the driver is installed successfully. When the driver is installed successful you will then see a Rockusb Device in the device manager window. Select "Browse the computer for driver software".įind the file unzipped file you downloaded earlier (Rockusb_Driver_v3.7.rar) and select either the 32/64bit folder then click "OK" to install. Select the Unknown device then right click and select "Update Driver Software". After your computer should detect the board and you will see an unknown device within device manager. Now the driver should have been installed successfully!ĭownload the file (Rockusb_Driver_v3.7.rar) from here and shut down the MarsBoard then connect the MarsBoard to the computer and let the board go to recovery mode. When the driver has finish installing then shut down MarsBoard and connect the MarsBoard to your computer and let the board go to recovery mode, then your computer will detect the board and you will see it within device manager. Then click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation.

#Rockchip batch tool prepare idb fail rk3066 install#

If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first.

Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility. There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zip If you have already installed the USB driver please skip this step.

install using RKDriverAssistant tools - the easy way.

There two ways to install the driver under Windows: Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below: To flash the update.img, you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. The Windows tool for flashing the image is provided by Rockchip.

a micro USB cable with one side plugged in to the OTG port of MarsBoard and the other side plugged into the USB port on PC.

a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit).

What you will need to flash the board is: You can always flash the MarsBoard, it never bricks (as the name :)) unless some hardware damage occurs.

3.4 Flash RKBatchTool Firmware File with RkFlashKit.

#Rockchip batch tool prepare idb fail rk3066 upgrade#

3.1 Using Linux Upgrade Tool to flash update.img.

2.2.2 Using AndroidTool to falsh image by partition.

2.2.1 Using AndroidTool to flash update.img (Firmware).

2.1.1 Install using RK Driver Assistant tools.